Code Item Section Reinspection Red Tag Reason For Violation Fixed Date
conversion conversion n/a No No Obtain and display a current state operating certificate in the machine room. 8/1/2018
conversion conversion n/a No No I recomend replacing the lower level door jamb as it is rustsed real bad along the bottom for about 1 foot up from the floor. This is going to cause the door not to close properly inthe near future. 8/1/2018
MO Minimum : Elevators CSR 40-5.100 State Operating Certificate 5.100(2) Display of Operating Certificate No No Obtain and display a current state operating certificate in the machine room 8/31/2020
MO Minimum : Elevators (H) - Machine Rooms (H)2 No No Install a closer on the new machine room door 9/25/2025
MO Minimum : Elevators CSR 40-5.100 State Operating Certificate 5.100(2) Display of Operating Certificate No No Obtain and display a current state operating certificate in the machine room 3/13/2026
A17.1-2016 : Elevators 2.7 - Fire Extinguisher 8.6.1.6.5 No No Have the fire extinguisher re certified 3/13/2026
A17.1-2016 : Elevators 11.1 - Access to Machine Room/Machinery Space/Control Room/Control Space 2.7.3 No No Install a door closer on the machine room door as it is to be self closing self latching always locked outside never locked inside , use a mechanical room door lock. 3/13/2026
A17.1-2016 : Elevators 5.1 - Pit access, lighting, stop switch, and condition 2.2.2.5 Sump Pump Required/Capacity (Re-Inspect) Yes No Check out the operating of the sump pump as it re cycles every 40 seconds. The check valve does not keep the water from returning to the pit.
A17.1-2016 : Elevators 1.6 - Car emergency signal 3.27 (Hydro) Phone or alarm not functioning (Mandatory Re-Inspection due in 14 days) Yes No Repair the emergency phone as the incoming line is dead it has no dial tone. 9/25/2025