Missouri Minimum : Platform Lifts
|
(U) - Existing Vertical and Inclined Platform Lifts
|
(U)1
|
|
|
Repair the holes in the hoistway with approved material.
|
4/6/2023
|
Missouri Minimum : Platform Lifts
|
(U) - Existing Vertical and Inclined Platform Lifts
|
(U)1 (Re-Inspect)
|
x
|
|
The hoist-way lighting shall be functional. Note: This is a fully enclosed VPL.
|
5/23/2024
|
Missouri Minimum : Platform Lifts
|
(U) - Existing Vertical and Inclined Platform Lifts
|
(U)1 (Re-Inspect)
|
x
|
|
The up and down switches in the hall and car shall be by means of a continuous pressure device. Note: An end user on site had deliberately jammed a binder clip in the top floor operating device, effectively shorting out the down button, causing the lift to automatically move down once the up button is released, or when any key-switch is placed in the run position in the case where the lift isn't at the bottom landing. When asked, the person on site refused to remove the binder clip. This creates an unsafe condition and shall be fixed.
|
5/23/2024
|
Missouri Minimum : Platform Lifts
|
(U) - Existing Vertical and Inclined Platform Lifts
|
(U)1 (Re-Inspect)
|
x
|
|
This inspection is incomplete, and needs to be completed. The unit could not be safely inspected without any light in the hoistway and with the binder clip stuck in the top landing operating device. If discovered, any further tampering of the lift will be reported to the Elevator Safety Unit for further investigation.
|
5/23/2024
|
Missouri Minimum : Platform Lifts
|
CSR 40-5.100 State Operating Certificate
|
5.100(2) display of certificate
|
|
|
A current MO State operating certificate shall be posted near the equipment, in a noncombustible frame with a clear protective vision plate over it.
|
3/5/2025
|
ASME A18.1-2005 : Lifts & Chairlifts
|
CSR 40-5.100 State Operating Certificate
|
5.100(2) display of certificate
|
|
|
A current MO State operating certificate shall be posted on or near the equipment, in a noncombustible frame with a clear protective vision plate over it.
|
6/16/2022
|