Code Item Section Reinspection Red Tag Reason For Violation Fixed Date
MO Minimum : Elevators 11 CSR 40-5.090 Inspection and Testing (3) Testing Procedures (Re-Inspect) x The testing has not been completed on the elevator at this time, the elevator was placed out of service. Only a machine room and hoistway inspection was performed, a full inspection shall be performed before the caregory 5 testing is completed. Reinspection is required. 3/20/2024
MO Minimum : Elevators 11 CSR 40-5.090 Inspection and Testing (3) Testing Procedures (Re-Inspect) x The testing has not been completed on the elevator at this time. Only a machine room and hoistway inspection was performed, a full inspection shall be performed before the caregory 5 testing is completed. Reinspection 5/20/2024
MO Minimum : Elevators 11 CSR 40-5.090 Inspection and Testing (3) Testing Procedures (Re-Inspect) x The testing has not been completed on the elevator at this time, Only a machine room and hoistway inspection were performed, a full inspection shall be performed before the Cat 5 testing is completed. Full speed counterweight buffer test was performed. All other remaining Cat 5 and emergency generator testing still needs to be performed to complete inspection. Re-inspection required 6/18/2024
MO Minimum : Elevators 11 CSR 40-5.090 Inspection and Testing (3) Testing Procedures (Re-Inspect) x Testing is incomplete, the generator testing needs to be completed before the category testing is completed. Re-inspection required
MO Minimum : Elevators (M) - Car Safeties and Speed Governors (M)6 x x Upon performing the required five year full load, the elevator safety governor was found to be worn to a degree that the activation would not set with any sort of consistency. Repair or replacement of the governor is required and a reinspection shall be performed before the elevator can be returned to service. 3/20/2024
conversion conversion conversion - reinspect x Unintended motion on inspection. 8/23/2018
conversion conversion conversion - reinspect x Emergency bell not working on battery 8/23/2018