Code	Item	Section	Reinspection	Red Tag	Reason For Violation	Fixed Date
MO Minimum : Elevators	11 CSR 40-5.090 Inspection and Testing	(3) Testing Procedures (Re-Inspect)	x		Car safeties need to be tested after safety drum rope is replaced. Re-inspection required	9/13/2023
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	8.6.3.1 Replacement Parts	x		Elevator safety drum rope was replaced at some point in time with a non code conforming material. Safety drum rope must be of a corrosion resistant non ferrous material and not of tiller rope construction. Re-inspection required	9/13/2023
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	8.6.1.6.5 Fire Extinguishers			Fire extinguisher in machine room is expired. Replace or have serviced
MO Minimum : Elevators	(K) - Car Platforms and Car Slings	(K)4			Install crosshead data plate with correct speed (200 fpm)
MO Minimum : Elevators	11 CSR 40-5.090 Inspection and Testing	(3) Testing Procedures (Re-Inspect)	x		Need to test elevator for operation on emergency power. Re-inspection required
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	3.10 - Hoistway construction	2.1			Observed numerous ledges exceeding 4”code requirement, repair as needed.
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	6.4 - Firefighters' service (A17.1b-1989 and later editions)	2.27.7 Firefighters' Emergency Operation: Operating Procedures			Post Phase I instructions near the f/f switch in the lobby.
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	3.27 - Crosshead data plate	2.16.3			Provide correct car speed on the cross head data plate.
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	4.12 - Standby power selection switch	2.27.2	x		Provide testing of the elevator emergency power selector switch, located next door in the security office.	10/8/2024
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	1.17 - Standby power operation	2.27.2	x		Provide testing of the elevator on emergency power.	10/8/2024