|
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators
|
1.17 - Standby power operation
|
2.27.2
|
Yes
|
No
|
Provide testing of the elevator on emergency power.
|
10/9/2024
|
|
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators
|
4.12 - Standby power selection switch
|
2.27.2
|
Yes
|
No
|
Provide testing of the elevator emergency power selector switch. Located next door in the security office.
|
10/9/2024
|
|
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators
|
3.27 - Crosshead data plate
|
2.16.3
|
No
|
No
|
Provide correct speed on the cross head data plate.
|
10/1/2025
|
|
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators
|
3.10 - Hoistway construction
|
2.1
|
No
|
No
|
Numerous ledges in the hoistway exceed code requirement of 4”, repair as needed.
|
10/1/2025
|
|
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators
|
5.1 - Pit access, lighting, stop switch, and condition
|
2.2.5 Illumination of Pits
|
No
|
No
|
Provide pit light to work.
|
10/1/2025
|
|
MO Minimum : Elevators
|
11 CSR 40-5.090 Inspection and Testing
|
(3) Testing Procedures (Re-Inspect)
|
Yes
|
No
|
Need to test elevator for operation on emergency power. Re-inspection required
|
10/1/2025
|
|
MO Minimum : Elevators
|
(K) - Car Platforms and Car Slings
|
(K)4
|
No
|
No
|
Install crosshead data plate with correct speed (200 fpm)
|
10/1/2025
|
|
MO Minimum : Elevators
|
(G) - Maintenance, Repair and Replacements
|
8.6.1.6 General Maintenance Methods
|
No
|
No
|
Shorten suspension cables to get a minimum of 6" of counterweight runby
|
4/10/2026
|
|
MO Minimum : Elevators
|
11 CSR 40-5.090 Inspection and Testing
|
(3) Testing Procedures (Re-Inspect)
|
Yes
|
No
|
Need to test elevator for operation on emergency power. Re-inspection required
|
4/10/2026
|
|
MO Minimum : Elevators
|
(K) - Car Platforms and Car Slings
|
(K)4
|
No
|
No
|
Install crosshead data plate with correct speed (200 fpm)
|
4/10/2026
|
|
MO Minimum : Elevators
|
(G) - Maintenance, Repair and Replacements
|
8.6.3.1 Replacement Parts
|
Yes
|
No
|
Elevator safety drum rope was replaced at some point in time with a non code conforming material. Safety drum rope must be of a corrosion resistant non ferrous material and not of tiller rope construction, needs to be replaced. Re-inspection required
|
9/12/2023
|
|
MO Minimum : Elevators
|
11 CSR 40-5.090 Inspection and Testing
|
(3) Testing Procedures (Re-Inspect)
|
Yes
|
No
|
Need to perform no-load testing of car safeties after safety drum rope is replaced with proper material. Re-inspection required
|
9/12/2023
|
|
MO Minimum : Elevators
|
(G) - Maintenance, Repair and Replacements
|
8.6.1.6.5 Fire Extinguishers
|
No
|
No
|
Fire extinguisher in machine room is expired, have serviced or replaced
|
10/1/2025
|