Code Item Section Reinspection Red Tag Reason For Violation Fixed Date
MO Minimum : Elevators (B) - Car Enclosure: Passenger (B)8 Car Lighting Not less than 2 lamps shall illuminate inside of car. Replace burned out bulb 3/3/2023
MO Minimum : Elevators (B) - Car Enclosure: Passenger (B)11 Phone or alarm not functioning ( Mandatory Re-Inspection due in 14 days) x emergency communication inoperable 11/6/2023
MO Minimum : Elevators (B) - Car Enclosure: Passenger (B)8 Car Lighting Cab ceiling panels are open crate type. Replace with solid panels or install plastic covers and end caps on light bulbs to prevent injury to passengers in event of breakage 11/22/2023
MO Minimum : Elevators (B) - Car Enclosure: Passenger (B)8 Car Lighting Cab ceiling panels are open egg crate type. Replace w/solid panels or install plastic covers & end caps on light bulbs to prevent injury to passengers in the event of breakage 3/3/2023
MO Minimum : Elevators (G) - Maintenance, Repair and Replacements 8.6.1.2.1 General Maintenance Requirements Documentation A written maintenance control program including all documentation listed in 8.6.1.2.2 shall be kept in machine room 3/3/2023
MO Minimum : Elevators (H) - Machine Rooms (H)1 Access to machine room shall be unobstructed. Remove trash/recycle bins in front of machine room door 3/3/2023
MO Minimum : Elevators (H) - Machine Rooms (H)1 Machine room shall be easily accessible 1/2/2024
A17.1-1996 : Elevators 1.5 - Car lighting and receptacles 204.7 Cab ceiling is open egg crate design. Replace with solid type panels or provice plastic tubes over light bulbs. 6/21/2021
A17.1-1996 : Elevators 2.41 - Maintenance Records 8.6.1.4 Provide on-site maintenance records in machine room. 6/21/2021
A17.1-1996 : Elevators CSR 40-5.100 State Operating Certificate 5.100(2) Display of Operating Certificate Post current operating certificate in machine room. 6/21/2021
MO Minimum : Elevators CSR 40-5.100 State Operating Certificate 5.100(2) Display of Operating Certificate Current state operating certificate shall be properly displayed in machine room 3/3/2023