|
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators
|
5.1 - Pit access, lighting, stop switch, and condition
|
2.2.2 Design and Construction of Pits
|
|
|
Pit equipment is rusted. Correct source of water backup.
|
10/17/2022
|
|
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators
|
1.1 - Door Re-opening device
|
8.6.4.13.1(c) Door Reopening Devices
|
|
|
Car door open button shall be operational.
|
|
|
MO Minimum : Elevators
|
CSR 40-5.100 State Operating Certificate
|
5.100(2) Display of Operating Certificate
|
|
|
A copy of the current state operating certificate shall be displayed in the machine room
|
|
|
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators
|
1.1 - Door Re-opening device
|
8.6.4.13.1(c) Door Reopening Devices
|
|
|
Car door open button shall operate
|
|
|
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators
|
1.1 - Door Re-opening device
|
8.6.4.13.1(c) Door Reopening Devices
|
|
|
Provide car door open button to work. (Pushing floor number opens door).
|
|
|
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators
|
CSR 40-5.100 State Operating Certificate
|
5.100(2) Display of Operating Certificate
|
|
|
Post current State Elevator Certificate.
|
|
|
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators
|
2.41 - Maintenance Records
|
8.6.1.4
|
|
|
A written MCP shall be kept in the machine room for each unit
|
|
|
MO Minimum : Elevators
|
(G) - Maintenance, Repair and Replacements
|
8.6.3.1 Replacement Parts
|
|
|
Bottom floor hoist way door missing roller, provide.
|
|
|
A17.1-2016 : Elevators
|
5.15 - Overspeed Valve
|
8.6.5.16.5
|
|
|
OSV in the pit is unsealed, provide testing.
|
|
|
MO Minimum : Elevators
|
11 CSR 40-5.090 Inspection and Testing
|
(3) Testing Procedures (Re-Inspect)
|
x
|
|
Unable to test safeties due to no documentation. Re-inspection required
|
1/26/2024
|
|
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators
|
1.5 - Car lighting and receptacles
|
8.6.4.15 Emergency Lighting
|
x
|
|
Provide existing emergency lights and bell to work.
|
|
|
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators
|
1.17 - Standby power operation
|
2.27.2
|
x
|
|
Provide existing battery backup lowering unit to work.
|
|
|
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators
|
6.4 - Firefighters' service (A17.1b-1989 and later editions)
|
8.11.2.2.6
|
x
|
|
Keys to operate unit shall be available, unable to verify Phase II, no keys. Re-inspection required
|
1/26/2024
|
|
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators
|
6.4 - Firefighters' service (A17.1b-1989 and later editions)
|
2.27.2-2.27.8
|
x
|
x
|
Phase 1 fire recall shall be operational. (Violation corrected 12/3/2020) Re-Inspection Pending
|
3/15/2022
|
|
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators
|
5.8 - Car safeties and guiding members - including roped-hydraulic elevators installed under A17.1b-1989 and later editions
|
8.11.3.4.1
|
x
|
|
A category 5 full load test is required in 2019.
|
11/5/2020
|
|
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators
|
6.4 - Firefighters' service (A17.1b-1989 and later editions)
|
2.13.5
|
x
|
x
|
The door open button shall be operational on fire service
|
11/5/2020
|
|
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators
|
6.4 - Firefighters' service (A17.1b-1989 and later editions)
|
2.27.2-2.27.8
|
x
|
x
|
Phase 1 & Phase 2 fire service key switches shall be keyed the same.
|
11/5/2020
|
|
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators
|
6.4 - Firefighters' service (A17.1b-1989 and later editions)
|
8.11.2.2.6
|
x
|
|
The keys were not on-site. Could not check COP stop switch or phase 2 fire service.
|
11/5/2020
|
|
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators
|
3.26 - Broken rope, chain, or tape switch
|
8.11.2.1.3(i)
|
x
|
x
|
Replace slack chain switch. Switch has been wet and is corroded.
|
8/27/2019
|