|
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators
|
2.32 - Control Valve
|
3.19.4.7.1 Overspeed Valve Test
|
x
|
|
OSV MUST BE TESTD SEALED AND TAGGED
|
9/24/2025
|
|
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators
|
3.16 - Traveling cables and junction boxes
|
2.8.1
|
|
|
2.8.1.1 - Raceway shall be used to run the traveling cable through the machine room wall and into the machine room controller. Note: Currently the traveling cable is running through the machine room wall and into the machine room controller in it's original sheath, without the use of a raceway.
|
9/24/2025
|
|
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators
|
3.16 - Traveling cables and junction boxes
|
2.8.1
|
|
|
2.8.1.1 - Raceway shall be used to run the traveling cable through the machine room wall and into the machine room controller. Note: Currently the traveling cable is running through the machine room wall and into the machine room controller in it's original sheath, without the use of a raceway.
|
9/24/2025
|
|
MO Minimum : Elevators
|
11 CSR 40-5.090 Inspection and Testing
|
8.6.5.16.5 Over Speed Valve Testing
|
|
|
The overspeed valve is not sealed. It shall be tested with the rated load on or before the next annual test per MO AHJ.
|
9/24/2025
|