|
MO Minimum : Elevators
|
11 CSR 40-5.090 Inspection and Testing
|
(3) Testing Procedures (Re-Inspect)
|
x
|
|
Could not finish inspection due to lack of resources. Governor and safeties must be tested to complete CAT 1 testing.
|
|
|
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators
|
11 CSR 40-5.090 Inspection and Testing
|
8.11 Periodic Inspection and Test.
|
x
|
|
Test incomplete - need to test full load safety set, 125% brake, pull out, pull thru, pit stop switch. Re-inspection required
|
8/30/2022
|
|
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators
|
11 CSR 40-5.090 Inspection and Testing
|
8.11 Periodic Inspection and Test.
|
x
|
|
Test incomplete, needs to have full load safety set, 125% brake test, pull out, pull thru & pit stop switch must be tested
|
4/24/2025
|
|
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators
|
2.17 - Drive machine brake
|
8.11.2.3.4
|
x
|
|
Finish performing uncontrolled motion test.
|
4/7/2020
|
|
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators
|
1.6 - Car emergency signal
|
8.6.4.15 Phone or alarm not functioning (Mandatory Re-Inspection due in 14 days)
|
x
|
|
Two-way emergency communication device is not functioning and needs to be repaired.
|
|