|
ASME A18.1-2014 : Platform Lifts & Stairway Chairlifts
|
2.1 - Runways
|
2.1.7
|
x
|
|
Electrical prints shall be provided showing final limit. Re-inspection required
|
4/4/2022
|
|
ASME A18.1-2014 : Platform Lifts & Stairway Chairlifts
|
2.1 - Runways
|
2.1.2.5
|
x
|
x
|
All doors shall be provided with a combination of a mechanical lock and electrical contact. The locking devices may permit the upper door to be opened only if the platform is within 2" of the upper landing. Re-inspection required
|
8/19/2024
|
|
ASME A18.1-2014 : Platform Lifts & Stairway Chairlifts
|
2.1 - Runways
|
2.1.9
|
x
|
x
|
Headroom clearance throughout the range of travel shall not be less than 79" as measured from the platform floor. This shall be mechanically stopped to maintain this range. Re-inspection required
|
8/19/2024
|
|
ASME A18.1-2014 : Platform Lifts & Stairway Chairlifts
|
2.6 - Platforms
|
2.6.7
|
x
|
|
Operating instructions shall be posted at operating stations
|
4/4/2022
|
|
ASME A18.1-2014 : Platform Lifts & Stairway Chairlifts
|
2.9 - Terminal Stopping Devices
|
2.9.3
|
x
|
x
|
Final limit switch shall be installed. Re-inspection required, Red tag
|
4/4/2022
|
|
ASME A18.1-2014 : Platform Lifts & Stairway Chairlifts
|
8.1 Hydraulic Driving Means
|
8.1.5.1 Metal Stops and/or Other Means
|
x
|
x
|
Drawings with the unit stopping at the proper height and of the upper extension on the upper landing door shall be resubmitted to the Missouri Chief Elevator Inspector for approval. Re-inspection required
|
8/19/2024
|